Brother Printer Error Codes

Have you ever encountered a printer error code while using your Brother multifunction printer? Chances are that you have. It is not that the Brother printer is an inferior machine; in fact, it is one of the best multifunction printers out there. But just like any machine, it can bog down. And when it does, a printer error code might pop up on your computer screen or on the LCD control panel of the printer.

What are the common printer error codes of Brother multifunction printers and how can we fix them? Here is a list of these error codes.

o Error Code S05. A printer error code like this happens when the transfer of data via the parallel port is not going smoothly. Just reset your printer to get it going again.

o Error Code E50. This printer error code flashes when the fuser unit of your Brother multifunction printer gets damaged. When this happens, it is a signal that you must replace your printer's fuser unit.

o Error Code E51. When the printer's laser beam, lid or mirrors are not placed in their appropriate positions, it results in this printer error code. Please check if ink cartridges and everything in your printer is where it should be before you start using it again.

o Black pages. Sometimes, the message "Black pages" can flash on the screen, or a black page is actually being printed out. In this case, you would need to take your printer to a service center and replace its jumper wires and diodes.

o Check paper path. When this message shows up, it means that your Brother printer has a dirty or misaligned eject roller. Clean it or straighten it up, whichever is necessary, and then try printing again.

o Poor quality of copy. When the output of your Brother multifunction printer, be it the printout or the fax, is smudgy, it could be because the scanning mirrors or the glass is dirty. Clean them up if they are. However, if these are clean, then the problem could be your printer's camera. You can try out unplugging your printer for a few hours, but if the problem persists, you may have to go to a service center to get your printer's camera replaced.

Article Source: http://EzineArticles.com/1310037

Read More

Fix Printer ERROR 11 Paper Out

Error code 11 Problem: " Paper out" error message

Possible Causes and Solutions:

1. Paper tray empty or not seated correctly. First try to re-seat the paper tray by pulling it out, making sure there are no obstructions in it's path and reinsert it. A buildup of toner on the edges of the tray which slide into the printer can sometimes cause problems. Take a sharp tool, like a razor blade and scrape the buildup off these edges. Also, check for cracks in the cassette. The cassette will loose it's stiffness and keep from holding its shape when there are cracks or small guide tabs that break off.

2. Sensor Arm Stuck or Broken - check for free movement of the sensor arm. On the LJ4/4M/4+/4M+ the sensor flag can get knocked out of place when a paper jam occurs and the tray is pulled out abruptly. Most times this can simply be reinstalled. If it's broken, you will need to replace the sensor flag.

3. Defective Tray Size Sensing or Configuration - Most trays have tabs which depress a series of switches when installed. Verify that the tabs aren't damaged and that the tray switches located in the printer are not damaged. You can depress these by hand and hear them click. Occasionally the contact for the micro switch will get bent and will have to be replaced. Also verify the configuration through the menus on the printer.

4. Defective Paper Control Sensor PCB - These do fail and will need to be replaced.

Read More