Brother Printer Error Codes

Have you ever encountered a printer error code while using your Brother multifunction printer? Chances are that you have. It is not that the Brother printer is an inferior machine; in fact, it is one of the best multifunction printers out there. But just like any machine, it can bog down. And when it does, a printer error code might pop up on your computer screen or on the LCD control panel of the printer.

What are the common printer error codes of Brother multifunction printers and how can we fix them? Here is a list of these error codes.

o Error Code S05. A printer error code like this happens when the transfer of data via the parallel port is not going smoothly. Just reset your printer to get it going again.

o Error Code E50. This printer error code flashes when the fuser unit of your Brother multifunction printer gets damaged. When this happens, it is a signal that you must replace your printer's fuser unit.

o Error Code E51. When the printer's laser beam, lid or mirrors are not placed in their appropriate positions, it results in this printer error code. Please check if ink cartridges and everything in your printer is where it should be before you start using it again.

o Black pages. Sometimes, the message "Black pages" can flash on the screen, or a black page is actually being printed out. In this case, you would need to take your printer to a service center and replace its jumper wires and diodes.

o Check paper path. When this message shows up, it means that your Brother printer has a dirty or misaligned eject roller. Clean it or straighten it up, whichever is necessary, and then try printing again.

o Poor quality of copy. When the output of your Brother multifunction printer, be it the printout or the fax, is smudgy, it could be because the scanning mirrors or the glass is dirty. Clean them up if they are. However, if these are clean, then the problem could be your printer's camera. You can try out unplugging your printer for a few hours, but if the problem persists, you may have to go to a service center to get your printer's camera replaced.

Article Source: http://EzineArticles.com/1310037

Read More

Fix Most Common Brother Printer Problems

Brother Printers supply premium products which are well designed and these come with first rate customer value. Also, this company has been winning a lot of awards for many years now. This is because, no matter what the printing requirements are - whether it is for home or for home office usage, for desktop office utilization, as well as small or the medium sized associated workgroups or it is color, Brother Printers are ready with the printing solutions for all printing needs.

Now the question is how to fix the most common Brother Printer problems. Some of the problems and their solutions are as follows:

1. How to clean Brother Printers?

It is very important to clean Brother Printers for maintaining the quality of print and because it also decreases the threat of any paper jams. After printing 20,000 pages or at the end of every year it is recommended that you clean the printer. The parts of Brother Printers which must be cleansed with a piece of dry cloth include:

The Paper Guide as well as Registration Roller - These are to be cleaned to avert paper from jamming in the printer.

Exit Roller - It has to be cleaned by faintly opening the printer's top cover. This will also aid in preventing the paper jams towards paper exit or the dirt from becoming visible on the print output.

2. How to install a Brother Printer?

To install a Brother Printer,

a. New LPR drivers have to be downloaded from Solutions page of Brother.

b. After the file download is complete double-click on the file to initiate the installation.

c. Click on "Install" button

d. Click in "Install" once again

e. Then enter the root password

f. If "RESULT=0″ appears and the conclusion of the resultant text output is within the package then the driver has been installed correctly.

g. The latest CUPS drivers can be downloaded from, Brother official website. For such Printers which are labeled with the red "*", one may have to create few links prior to setting up the driver. A detailed installation guide in support of CUPS driver can be found in the website as well.

3. How to find such Printer drivers?

If you are looking for quality drivers then Brother Printer drivers can be found and downloaded very easily by visiting brother driver's page. You can find software for updating drivers there too.

4. How to setup or install wireless Brother Printers?

If you are searching for setup technique for printers on the wireless network then on the basis of the operating system you have click on the following links -

a. Windows - wireless setup without a network cable - This will help you configure a wireless printer which doesn't have network cable as well as how to install your printer driver.

b. Windows -temporarily using a network cable to setup the printer- This elaborates the technique of installation of printer driver and also configuration of those wireless printers which temporarily utilize network cable.

These wireless printers form Brothers are of the highest quality as are the other varied printers of this recognized company.

Article Source: http://EzineArticles.com/5023554

Read More

Steps to Fix Runtime Error 482

How To Fix Runtime Error 482


The Runtime 482 Error arises when the user attempts to utilise the “PrintForm” protocol. More specifically, when the user attempts to change a page level setting (such as Orientation) the Runtime Error 482 is shown due to either a damaged part of your system or a corrupt file causing the damage. This error is typically present on older computers using the operating systems Windows 95, 98, ME, NT, or 2000; and can arise at seemingly random times. Here’s how to fix this error:

What Causes Runtime Error 482


The error may show itself as:

Run-time error ’482′: Printer Error

or

Printer Error

These errors usually arise from the use of PrintForm on older Windows operating systems, however the timing of the error various from operating system. For example, in Windows 2000 and NT the error can occur even if the user succesfully completed one call to PrintForm. In older Windows, this error can occur even during the first call to PrintForm. To resolved this issue, please follow the steps below.

How To Fix Runtime Error 482


Step 1 – Do Not Use “PrintForm”

By not using PrintForm you are avoiding any possible conflict with the utility. Although this not a fix, it is a very effective workaround, which normally works every time. To stop using PrintForm, follow the steps below for Windows 2000 and NT:

Calling the EndDoc method after the call to PrintForm fixes the problem.
For older Windows Operating Systems:

Calling the EndDoc method before the call to PrintForm skirts the problem but any settings made to the Printer object are lost. This means that PrintForm uses the settings of the current default printer.
Use the Common Dialog control to change page properties instead of direct assignments to the properties of the Printer object.

The EndDoc method (For Windows 2000 and NT):

Using Win32 API (Application Programming Interface) enter this code:
Private Sub Form_Click()
Printer.Orientation = vbPRORPortrait
PrintForm
Printer.EndDoc
Printer.Orientation = vbPRORLandscape
PrintForm
End Sub
For older Windows Operating Systems use this EndDoc method:

Using Win32 API, type this code
Private Sub Form_Click()
Printer.Orientation = vbPRORPortrait
Printer.EndDoc
PrintForm
Printer.Orientation = vbPRORLandscape
Printer.EndDoc
PrintForm
End Sub

Running this will allow you to stop the error occurring and to run without this error. Alternatively, if that fails to work, try the follow step.

Read More

HP Printer Error Codes

Are you worried about the numbers that come out from your printer's display panel while you are using your HP printers? Well, these can be HP printer error codes. You don't have to worry about them as there are solutions to such errors. Want to know more about what these error codes are and see how they can be solved?

HP printer error codes to watch out for

Some of the most common printer error codes that can pop out your computer screens (or your printer's display panel) are due to paper problems. There are those that result from use of wrong HP supplies.

1. Error 10. This denotes "Supplies Memory Error". This error actually comes out depending on your printer model. This is caused by the printer having problems with the memory chip. The simplest way to solve this problem is to reset the printer settings by turning the printer off and on.

2. Error 11. This printer error code means "Paper Out". The problem with this is it appears even if you have loaded the paper on the tray. To solve this, you have to check the problem and see to it that the paper is loaded correctly. Sometimes, this can also be a result of HP ink or toner build-up on the sides of the paper tray so better check on that too.

3. Error 12. This is a code for "Open or No EP Cartridge." If this printer error code shows up on the screen, it means that the top cover is open. This can be a result of defective toner cartridges, cooling fans or PS5 sensors. You should then check where the defect is coming from and replace the parts when necessary.

4. Error 13. This code means "Paper Jam". The first thing you can do to solve this problem is to check on your paper. See to it that it matches what is specified for your printer model. Some HP printers may have problems when you load thick paper inside them. In view of this, you should check HP's paper guide.

5. Error 14. This can be an indicator of "No EP or Toner Cartridge." This is one of the HP printer error codes that may confuse you especially if you have installed your HP printer cartridges. Well, how can you solve this then? Simply pull out the cartridge and reinstall them again.

6. Error 16. This HP printer error code is short for "Toner Low". This might mean that you already have an empty printer cartridge. But at times this can also mean that the printer toner is not distributed evenly. When this is the case, simply shake the printer cartridge from back to front and side to side.

7. Error 21. Also known as HP printer error code for "Print Overrun", this problem can be solved by seeing to it that your printing job is not too complex.

There are still other HP printer error codes that may come out depending on the printer model you own. You can check on the manual that comes with your HP printers when these codes appear on the printer's display.

Article Source: http://EzineArticles.com/4320896

Fix HP Printer Error Code 20

HP Printer error code 20, as the name describes, is a problem with the HP printer on your system. The issue is typically caused if the printer is either not configured correctly, or your system tries to send an erroneous command to it. This error will typically show when you try and print a document / spreadsheet or another piece of data from your system, and will stop the print-out from proceeding. In order to fix this, it's advisable that you follow the steps outlined in this tutorial.

The HP error 20 will generally show in this format:

There are several reasons why this error may show, including having an outdated / erroneous printer driver, not installing the printer software you need on your PC correctly, or having registry errors on your system. The bottom line of the problem is basically that when you try and print out a document / file from your Printer, there are certain issues which prevent Windows from either recognizing or connecting with the printer on your system. To fix the issue, you need to repair the various problems which cause this to occur - which can be done in quite an easy way.

The first thing to do to ensure the error code 20 is does not show up again on your system is make your HP printer the "default" printer. It might be the case that your system will be unable to use the printer as it cannot identify which one to use. Making your HP printer your default printer will resolve this issue, and should help your system to correctly print out. After that, you should also look to reinstall the HP printer software on your computer. This will essentially remove the printer from your PC and then place it back there again - allowing your system to correct any potential issues it had the last time it was installed.

It's highly recommended that you also "clean out the registry" of your PC by using a registry cleaner program. These are software tools which will fix any errors that are inside the 'registry' of your system - which is a large database that Windows uses to store vital settings and information for your computer. It's often the case that many registry settings will either become damaged or corrupted - leading your PC to be unable to use the files that it needs to run. This often causes a variety of errors to show, and is one of the main reasons for the HP printer error code 20 showing. To fix this, it's advisable that you clean out the registry of your system with a registry cleaner tool.

Article Source: http://EzineArticles.com/4774431

Read More

Fix Printer Error 0x000006be

Are you trying to connect to print queue hosted on Windows XP, Windows 2000 Server or Windows 2003 Server while your operating system is Windows Vista or Windows 2000 Server client? You may receive Error 0x000006be.

On client system users are either logged in using an Administrator account OR User account. In some cases system is not able to establish connection with the print. Following is the error message when you are logged on with Administrator Account.

Connect to Printer

Windows cannot connect to the printer.

Operation could not be completed (error 0x000006be).

Either the printer name was typed incorrectly, or the specified printer has lost its connection to the server.

And when you are Logged On using User Account, you receive

Connect to Printer

Windows cannot connect to the printer.

Operation could not be completed (error 0x000006be).

You do not have sufficient access to your computer to connect to the selected printer.

This error occurs because of the fact that you are attempting to connect to HP printer. As Hewlett-Packard (HP) inter driver uses HPBmini.dll file of the previous version.

In order to fix this Error 0x000006be, you need to get the newer version of printer driver that is compatible with your operating system. To obtain a new version you should visit HP website and download driver from there.

It is recommended that you make sure the version of HPBmini.dll file before performing installation. Please double check the new driver; it should be 1.0.0.16, 1.0.0.18 or the later version.

Source:- Ezinearticles.com

Read More

Fix Error Code 0x000006d9 on a Sharing a Printer in Window 7

This Error comes when you are try to share the printer and the system leaves you with Error Code 0x000006d9.
The problem occurs because of two issues: -

1. Window Firewall is Turned On.
2. Network discovery and Printer sharing is Turned Off.

So by turning off the Widows Firewall and turning on the network discovery and printer sharing the error code can be fixed.

Steps to turn off Windows Firewall: -

1. Left Click Start Menu Button and Type services.msc in the Search Space. Right Click on services Link and Left Click Run as administrator option.

2. Left Click Yes Button If, prompted by UAC.

3. Right Click on Windows Firewall in Right Pane and Select Properties option.

4. Under the General Tab Select Startup type: as Disabled and Left Click on OK button.

 5. Again try to share the Printer.

If the Problem is not yet resolved try following below steps to turn On Network discovery and printer sharing.

Steps to Turn On Network Discovery and Printer Sharing: -

1. Go to Control Panel (All items View) and Left Click on Network and Sharing Center.




Image 4

2. Left Click on Change advanced sharing settings in Left pane.




Image 5


3. Select the Radio buttons Turn on network discovery under Network discovery section and Turn on file and printer sharing Under File and printer sharing section, Left Click on Save changes button.




Image 6

4. Again Try to share the Printer.

Read More