kyocera machines have a self diagnostic function to displays an error code whenever a problem occurs. Low level error codes can be reset by simply restarting the machine but some of them (C 6000, C 6020, C 6030, C 6050, C 6100, C 6200, C 6300 etc) must be reset by a technician.
Causes:
1. Unstable power source
2. Low/High voltages
3. Broken thermisted wire
4. Poor contact in the thermister connector terminals.
5. Heater lamps are broken or not installed correctly.
Before reseting "6XXX" series code, make very sure that defective parts have been replaced/repaired.
Reset Procedure:
Enter 1087-1087 (1087 twice) from the keypad.
Enter 163 by using the keypad keys.
Press "Start" (the green button) twice.
The machine will restart automatically.
Similar Topic:
Ricoh Error Codes
Causes:
1. Unstable power source
2. Low/High voltages
3. Broken thermisted wire
4. Poor contact in the thermister connector terminals.
5. Heater lamps are broken or not installed correctly.
Before reseting "6XXX" series code, make very sure that defective parts have been replaced/repaired.
Reset Procedure:
Enter 1087-1087 (1087 twice) from the keypad.
Enter 163 by using the keypad keys.
Press "Start" (the green button) twice.
The machine will restart automatically.
Similar Topic:
Ricoh Error Codes
0 comments:
Post a Comment