Friday, November 18, 2011

Reseat Fuser Dell 2135cn Printer

Notice: To protect the drums of the print cartridges against bright light, close the front cover within 5 minutes. If the front cover remains open for more than 5 minutes, print quality may deteriorate.
Note: Remove any print jobs from the center output tray, and close the multipurpose feeder cover before opening the front cover.



To reseat the fuser, perform the following steps:

1. Turn off the printer and wait for 30 minutes.
2. Push the side button and open the front cover
3. Pull the lever of the Fuser Assembly to release the lock


4. Disengage the connector of the fuser assembly by pulling the right side of the fuser assembly toward you with the lever released
5. Lift up the fuser assembly to remove it from the printer.
6. To reinstall the fuser, follow steps 2 through 5 in reverse.


0 comments:

Post a Comment